International Rollforms Inc
ProductsSpecializes in cost effective solutions for all your custom roll forming requirements. With over 50 years experience in the forming industry, has the ability to provide a very wide variety of roll formed parts with special attention to demanding tolerances of these rollformed parts.
- Split Set
- Instrumented Split Set
Split Set® friction rock stabilizers are manufactured by International Rollforms, Inc. for underground or above ground applications in mines, tunnels, slopes, or wherever reliable ground support is needed. Our friction rock bolts produce superior holding power due to their unique design that exerts pressure against the rock over its full contact length immediately upon installation. When ground shift occurs, our rock bolts conform to the changing ground conditions. The result is a tight grip that actually grows stronger with time and ground movements, providing reliable ground support. Friction Bolts never needs tightening. Our friction rock stabilizers are a simple system requiring only 2 parts, a tube and bearing plate. Fast, easy installation takes usually less than a minute – just drill and drive. Split Set® stabilizers come in 3 models. They are available in lengths and sizes to meet your needs and are made of standard, galvanized, or stainless steel.
Instrumented Split Set,New instrumented tecnology for split set stanilizers develop by YieldPoint. keeping workers safe is paramount. Monitoring movement in the rock is important aspect as it allows preventive measure base on real data. If wall starts moving faster than normal the engineer will take maesure to keep people safe. In the case of a ground fall, the area must be evacuated and closed for assessment and remediation, the production will be totally closed, the cost can be very high. If Instrumented sensor company Yieldpoint presented instrumented split set that a set of new technology for split set stabilizer equipped with the inserting instrumented sensor inside to monitor the ground movement.
