Wennian

Products

Welded mesh reinforcement is made from metal rods with 3 to 40 mm diameter. These metal rods are perpendicular bonded by spot welding. Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.

Concrete Reinforcing Mesh

Concrete Reinforcing Mesh – Welded Ribbed Steel Rebar Fabric Reinforcement

Welded mesh reinforcement is made from metal rods with 3 to 40 mm diameter. These metal rods are perpendicular bonded by spot welding. Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.

Our reinforcing mesh wire is ribbed steel rod, which creates improves bonding to concrete, minimizes any concrete cracking that may occur as a result of concrete shrinkage.

Smooth steel reinforcing mesh also can be manufactured according customers special requirement.


Concrete reinforcing mesh from deformed steel welded details


Concrete reinforcing square mesh in 7.6 mm steel wire with 100 mm mesh size

Specification of concrete reinforcing mesh:

  • Type: Concrete mesh heavy type (diameter of rods above 12 mm) and light type (diameter of rebar rods from 3 mm up to 10 mm).
  • Material: stainless steel rebar rods, galvanized steel rods (with its excellent resistance to corrosion, galvanized reinforcing mesh can be successfully used in wet conditions).
  • Mesh shape: rectangular or square.
  • Distance between rods 100, 200, 300, 400 and 500 mm.
  • Mesh sheet width: 650 mm – 3800 mm.
  • Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.
  • Standard reinforcing mesh sizes are 6.0 m × 2.4 m. And 4.80 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m also offered.

Steel reinforcing mesh suitable for use in a variety of applications including:

  • Building. Welded mesh reinforcement is widely used for reinforcement of concrete structures. It increases the strength of formed concrete structures. For this use, welded mesh reinforcement wire diameter is from 10 to 30 mm.
  • Welded reinforcing mesh used for the reinforcement of road surfaces.
  • Reinforcement mesh is applied in everyday life, for the reinforcement of masonry walls, as well as for the manufacture of various fences.


Concrete reinforcing rectangle mesh from 8.55 mm longitudinal wire and 7.6 mm cross wire with 100 mm × 200 mm mesh size

Square Reinforcing Mesh

Square Reinforcing Welded Mesh From Superior Ribbed Steel Rebar

Square reinforcing mesh is manufactured from superior quality ribbed steel rebar that are welded together with equal spacing in both directions to form square apertures.


Concrete square mesh from 9.50 mm galvanized deformed steel in 200 mm mesh size

Square reinforcing meshes are convenient and economical reinforcement option for modern concrete structures, widely used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall.


Concrete square mesh from 6.75 mm galvanized deformed steel in 200 mm mesh size

Specification of square reinforcing mesh:

  • Mesh size: 4.80 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m, 6 m × 2.4 m. Full size mesh sheets are 6 m × 2.4 m with side lap wires to minimize the laps between sheets on large areas, another in a handy 2 m × 4 m sheet, perfect for smaller jobs like driveways or DIY.
  • Cross wire and long wire diameter (mm): 6.00, 6.75, 7.60, 8.00, 8.55, 9.50, 10.00.
    Mesh opening: 100 mm × 100 mm, 200 mm × 200 mm.
  • Square mesh lap has to be overlapped tied by tie wire at least 225 mm.


Square mesh overlapped at least 225 mm need be tied by tie wire

Welded Reinforcing Mesh

Welded Reinforcing Mesh From 3-12 mm Reinforcing Rebar

Reinforcing welded wire mesh are made from reinforcing wire, located in two mutually perpendicular directions and connected at the intersection of resistance spot welding.


Welded reinforcing mesh from galvanized ribbed steel wire can be used for road reinforcement

Advantages
Welded reinforcement mesh is made by welding, which does not disturb the structure of the metal. It is easier to move and laid in concrete, and reinforcement mesh just holds its shape and mesh

Specification of welded reinforcing mesh:

  • Diameter of reinforcing rebar: 3-12 mm.
  • Reinforcing rebar wire distance: 100, 150 , 200, 250, 300 , 400 and 500 mm.
  • Mesh size: 50 × 50, 100 × 100, 150 × 150, 200 × 200 mm.
  • Mesh sheet width: 0.5-2.4 m.
  • Mesh sheet length: 1-12 m.
  • The most popular mesh sheet size: 2 m × 6 m, 2 m × 3 m, 2 m × 4 m.

Our company also has the ability to produce reinforcing mesh according to customer drawings.

Application of reinforcing welded wire mesh:
Reinforcing mesh is used to increase the structural strength of reinforcing concrete structures and asphalt. Creation of the inner frame reinforcement for concrete structures can provide a high level of performance . Reinforcing mesh is also used for other purposes, such as:

  • Building. Welded mesh reinforcement is widely used for reinforcement of concrete structures. In this case, inside poured concrete forms (under the slab, frame foundation slab is poured) laid welded reinforcing mesh, which serves to increase the strength of formed concrete structures.
  • Making frames.
  • Reinforcement of road surfaces or parking areas, so welded reinforcing mesh called road reinforcing mesh grid (5-6 mm).
  • Manufacture of various fences.
  • Used as Masonry mesh (3-4 mm wire).
  • Used as coal mine supporting mesh for coal mine roadway supporting.

Technical point: as armature construction, welded mesh reinforcement is laid with a slight overlap. Therefore less useful area maps by about 10% than its geometrical dimensions.


Galvanized welded reinforcing mesh with 150 mm square mesh from 6 mm steel


Welded reinforcement mesh with 150 × 200 mesh opening in 10 mm steel rods used for concrete trench mesh

Concrete Slab Mesh

Concrete Slab Mesh – Welded Building Wall Reinforcement

Concrete slab mesh is reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses. For example, block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.


Concrete slab mesh is packaged in our warehouse ready for delivery to construction site

Specification of concrete slab mesh:

  • Material: hot dipped galvanized, electro galvanized or stainless steel.
  • Slab mesh sheets: length 6 m × width 2.4 m.
  • Mesh size: 200 × 200 mm or 100 × 100 mm.


Concrete slab mesh in size 200 × 200 × 10 mm supported by steel chair in construction site

Concrete Reinforcing Mesh Accessories

Tie Wire, Steel Links and Prefabricated Steel Square Cages

Tie Wire – Bundling wire

Tie Wire – Bundling wire, tying Wire- to secure reinforcement bars in place until the concrete is poured.


Black annealed tie wire coil

  • Diameter: 1.25 mm – 3.2 mm.
  • Package: 3 kg, 5 kg, 10 kg/coil, or 3 kg, 5 kg/bundle.


Pre-cut black wire

Bag Ties – Loop ties

Loop ties – Loops on both ends for ease of fixing. Double loop wire ties can be used as an alternative to using tying wire. The wire loop ties can be bent around the reinforcement and then tied using the tying tool.

  • Material: galvanized or black wire.
  • Diameter: 1.6 mm.
  • Length: 110, 125, 150, 200, 250, 300 mm.
  • Package: 2000 piece/roll.


Black wire double loop ties with loops on both ends for ease of fixing

Reinforcing Steel Square Links

Reinforcing steel square links size:

  • Material: high tensile reinforcing steel wire.
  • Diameter: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm.
  • Dimension: 300 mm × 300 mm, 350 mm × 350 mm, 400 mm × 400 mm, 450 mm × 450 mm.


Reinforcing steel square links

Reinforcing Steel Rectangular Links – Steel Joiners

Specification of reinforcing steel rectangular links:

  • Material: high tensile reinforcing steel wire.
  • Diameter: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm.
  • Dimension: 300 × 400 , 350 × 450, 400 × 500, 450 × 500 mm.


Reinforcing steel rectangular links

L Shaped Reinforcing Steel

Specification of L shape reinforcing steel:

  • L Shaped Reinforcing Steel – L bars, elbows, bends.
  • Diameter: 8 mm, 10 mm, 12 mm, 14 mm, 16 mm.
  • Dimension: 200 mm × 1000 mm, 500 mm × 1000 mm, 1000 mm × 1000 mm.


L-shaped reinforcing steel

U Shaped Reinforcing Steel

Specification of U shaped reinforcing steel:

  • Diameter: 10 mm, 12 mm, 14 mm, 16 mm.
  • Dimension (mm): 1000 × 200 × 1000, 1000 × 300 × 1000, 1000 × 500 × 1000.


U Shaped Reinforcing Steel

Prefabricated round or square shape Cages

Prefabricated round or square shape Cages are available for your groundwork or footings piers and pads with very quick delivery.

Prefabricated steel square cages dimension:

  • 200 mm × 200 mm, main steel 12 mm, 8 mm links.
  • 200 mm × 200 mm, main steel 16 mm, 8 mm links.
  • 200 mm × 200 mm, main steel 20 mm, 10 mm links.


Prefabricated steel square cage

Prefabricated steel round cages dimension:

  • Cage diameter 200 mm, main steel 12 mm, round spiral wire 8 mm.
  • Cage diameter 200 mm, main steel 16 mm, round spiral wire 8 mm.
  • Cage diameter 200 mm , main steel 20 mm, round spiral wire 10 mm.


Prefabricated steel round cages

Z bars


Z bars